Skip to main content
Castles V3M2
Updated over 2 months ago

In the box with your V3M2 card terminal, you should also receive :

  • Wi-Fi access point & power supply

  • LAN (Ethernet) cable

  • Charging dock & power supply

  • 2x till rolls

Please get in touch with us if any of the contents are missing.


Setting up the Wi-Fi access point

Step 1

Connect the Ethernet cable into the blue WAN Port. Plug the other end of the cable into the internet source such as a router.

Step 2

Connect the power supply to the Wi-Fi Access Point and connect the power socket to the power outlet and turn it on.

Step 3

The power, internet and Wi-Fi lights will appear on the Access Point indicating it is ready.


Setting up your terminal

Step 1

Connect the USB cable to power adaptor. Once the power supply is connected to the power outlet, connect the micro-USB to the terminal.

Step 2

Turn the power outlet ON and the orange power light will come on showing the terminal is charging.


Setting up the charging dock

Step 1

Place the charging dock on a soft surface with the back facing up.

Step 2

Lift the cable tidy and connect the power cable into the DC 9V port and the power supply to the power outlet.

Step 3

The green power indicator will appear when the charging dock is receiving power.

Step 4

Place the terminal onto the charging dock. If the terminal is receiving power, a solid orange light will appear.


Installing the till roll

Step 1

Pull upwards on the lever located in the middle of the printer door.

Step 2

Place the till roll in the compartment. The paper must feed from underneath the roll.

Step 3

Close the printer door.


Taking payments

Step 1

Press and hold the power button (above the red key) until the screen lights up. The terminal will power on and initialise for use.

Step 2

When the ‘enter amount’ screen is displayed, attempt a test transaction with your own payment card. An ‘approval’ message will be displayed after a successful transaction.

Did this answer your question?